View source for DFARS 252.225-7035 Buy American--Free Trade Agreements--Balance of Payments Program Certificate

{{ContractClause
|EffectiveDate=2014/11/01
|ClauseorProvision=Provision
|Prescribedin=225.1101(9)
|PrescriptionOverview===Prescription==

Use the basic or an alternate of the provision at 252.225-7035, Buy American—Free Trade Agreements—Balance of Payments Program Certificate, instead of the provision at FAR 52.225-4, Buy American—Free Trade Agreements—Israeli Trade Act Certificate, in solicitations, including solicitations using FAR part 12 procedures for the acquisition of commercial items, that include the basic or an alternate of the clause at 252.225-7036, Buy American—Free Trade Agreements—Balance of Payments Program. If the solicitation includes the provision at FAR 52.204-7, do not separately list the provision 252.225-7035 in the solicitation.

 
:(i)  Use the basic provision in solicitations when the basic of the clause at 252.225-7036 is used.

 
:(ii)  Use the alternate I provision when the solicitation includes alternate I of the clause at 252.225-7036.

 
:(iii)  Use the alternate II provision when the solicitation includes alternate II of the clause at 252.225-7036.

 
:(iv)  Use the alternate III provision when the solicitation includes alternate III of the clause at 252.225-7036.

 
:(v)  Use the alternate IV provision when the solicitation includes alternate IV of the clause at 252.225-7036.

 
:(vi)  Use the alternate V provision when the solicitation includes alternate V of the clause at 252.225-7036.
|FARClauseOverview===Provision==

===BUY AMERICAN—FREE TRADE AGREEMENTS—BALANCE OF PAYMENTS PROGRAM CERTIFICATE—BASIC (NOV 2014)=== 

 
===(a)  Definitions===

“Bahrainian end product,” “commercially available off-the-shelf (COTS) item,” “component,” “domestic end product,” “Free Trade Agreement country,” “Free Trade Agreement country end product,” “foreign end product,” “Moroccan end product,” “Panamanian end product,” “Peruvian end product,” “qualifying country end product,” and “United States,” as used in this provision, have the meanings given in the Buy American—Free Trade Agreements—Balance of Payments Program—Basic clause of this solicitation. 

 
===(b)  Evaluation===

The Government—

 
(1)  Will evaluate offers in accordance with the policies and procedures of Part 225 of the Defense Federal Acquisition Regulation Supplement; and

 
(2)  For line items subject to the Buy American—Free Trade Agreements— Balance of Payments Program—Basic clause of this solicitation, will evaluate offers of qualifying country end products or Free Trade Agreement country end products other than Bahrainian end products, Moroccan end products, Panamanian end products, or Peruvian end products without regard to the restrictions of the Buy American or the Balance of Payments Program. 

 
===(c)  Certifications and identification of country of origin.===

 
(1)  For all line items subject to the Buy American—Free Trade Agreements— Balance of Payments Program—Basic clause of this solicitation, the offeror certifies that— 

 
:(i)  Each end product, except the end products listed in paragraph (c)(2) of this provision, is a domestic end product; and

 
:(ii)  Components of unknown origin are considered to have been mined, produced, or manufactured outside the United States or a qualifying country.

 
(2)  The offeror shall identify all end products that are not domestic end products.

 
:(i)  The offeror certifies that the following supplies are qualifying country (except Australian or Canadian) end products:

 
(Line Item Number)........................................(Country of Origin)

 
:(ii)  The offeror certifies that the following supplies are Free Trade Agreement country end products other than Bahrainian end products, Moroccan end products, Panamanian end products, or Peruvian end products: 

 
(Line Item Number).........................................(Country of Origin)

 
:(iii)  The following supplies are other foreign end products, including end products manufactured in the United States that do not qualify as domestic end products, i.e., an end product that is not a COTS item and does not meet the component test in paragraph (ii) of the definition of “domestic end product”:

 
(Line Item Number)..........................................(Country of Origin (If known))

 

==Alternate I==

As prescribed in 225.1101(9)(ii), use the following provision, which uses “Canadian end product” in paragraph (a), rather than the phrases “Bahrainian end product,” “Free Trade Agreement country,” “Free Trade Agreement country end product,” “Moroccan end product,” “Panamanian end product,” and “Peruvian end products” in paragraph (a) of the basic provision; uses “Canadian end products” in paragraphs (b)(2) and (c)(2)(i), rather than “Free Trade Agreement country end products other than Bahrainian end products, Moroccan end products, Panamanian end products, or Peruvian end products” in paragraphs (b)(2) and (c)(2)(ii) of the basic provision; and does not use “Australian or” in paragraph (c)(2)(i): 

 
===BUY AMERICAN—FREE TRADE AGREEMENTS—BALANCE OF PAYMENTS PROGRAM CERTIFICATE—ALTERNATE I (NOV 2014)=== 

 
===(a)  Definitions===

“Canadian end product,” “commercially available off-the-shelf (COTS) item,” “component,” “domestic end product,” “foreign end product,” “qualifying country end product,” and “United States,” as used in this provision, have the meanings given in the Buy American—Free Trade Agreements—Balance of Payments Program—Alternate I clause of this solicitation. 

 
===(b)  Evaluation===

The Government— 

 
(1)  Will evaluate offers in accordance with the policies and procedures of part 225 of the Defense Federal Acquisition Regulation Supplement; and

 
(2)  For line items subject to the Buy American—Free Trade Agreements—Balance of Payments Program—Alternate I clause of this solicitation, will evaluate offers of qualifying country end products or Canadian end products without regard to the restrictions of the Buy American or the Balance of Payments Program.

 
===(c)  Certifications and identification of country of origin=== 

 
(1)  For all line items subject to the Buy American—Free Trade Agreements—Balance of Payments Program—Alternate I clause of this solicitation, the offeror certifies that—

 
:(i)  Each end product, except the end products listed in paragraph (c)(2) of this provision, is a domestic end product; and

 
:(ii)  Components of unknown origin are considered to have been mined, produced, or manufactured outside the United States or a qualifying country.

 
(2)  The offeror shall identify all end products that are not domestic end products.

 
:(i)  The offeror certifies that the following supplies are qualifying country (except Canadian) end products:

 
(Line Item Number).........................................(Country of Origin)

 
:(ii)  The offeror certifies that the following supplies are Canadian end products:

 
(Line Item Number).........................................(Country of Origin)

 
:(iii)  The following supplies are other foreign end products, including end products manufactured in the United States that do not qualify as domestic end products, i.e., an end product that is not a COTS item and does not meet the component test in paragraph (ii) of the definition of “domestic end product”:

 
(Line Item Number).........................................(Country of Origin (If known))

 

==Alternate II==

As prescribed in 225.1101(9)(iii), use the following provision, which adds “South Caucasus/Central and South Asian (SC/CASA) state” and “South Caucasus/Central and South Asian (SC/CASA) state end product” to paragraph (a), and uses different paragraphs (b)(2) and (c)(2)(i) than the basic provision: 

 
===BUY AMERICAN—FREE TRADE AGREEMENTS—BALANCE OF PAYMENTS PROGRAM CERTIFICATE—ALTERNATE II (NOV 2014)=== 

 
===(a)  Definitions===

“Bahrainian end product,” “commercially available off-the-shelf (COTS) item,” “component,” “domestic end product,” “Free Trade Agreement country,” “Free Trade Agreement country end product,” “foreign end product,” “Moroccan end product,” “Panamanian end product,” “Peruvian end product,” “qualifying country end product,” “South Caucasus/Central and South Asian (SC/CASA) state,” “South Caucasus/Central and South Asian (SC/CASA) state end product,” and “United States,” as used in this provision, have the meanings given in the Buy American—Free Trade Agreements—Balance of Payments Program—Alternate II clause of this solicitation. 

 
===(b)  Evaluation===

The Government—

 
(1)  Will evaluate offers in accordance with the policies and procedures of part 225 of the Defense Federal Acquisition Regulation Supplement; and

 
(2)  For line items subject to the Buy American—Free Trade Agreements—Balance of Payments Program—Alternate II clause of this solicitation, will evaluate offers of qualifying country end products, SC/CASA state end products, or Free Trade Agreement country end products other than Bahrainian end products, Moroccan end products, Panamanian end products, or Peruvian end products without regard to the restrictions of the Buy American or the Balance of Payments Program. 

 
===(c)  Certifications and identification of country of origin.===

 
(1)  For all line items subject to the Buy American—Free Trade Agreements—Balance of Payments Program—Alternate II clause of this solicitation, the offeror certifies that— 

 
:(i)  Each end product, except the end products listed in paragraph (c)(2) of this provision, is a domestic end product; and

 
:(ii)  Components of unknown origin are considered to have been mined, produced, or manufactured outside the United States or a qualifying country.

 
(2)  The offeror shall identify all end products that are not domestic end products.

 
:(i)  The offeror certifies that the following supplies are qualifying country (except Australian or Canadian) or SC/CASA state end products:

 
(Line Item Number).........................................(Country of Origin)

 
:(ii)  The offeror certifies that the following supplies are Free Trade Agreement country end products other than Bahrainian end products, Moroccan end products, Panamanian end products, or Peruvian end products: 

 
(Line Item Number).........................................(Country of Origin)

 
(iii)  The following supplies are other foreign end products, including end products manufactured in the United States that do not qualify as domestic end products, i.e., an end product that is not a COTS item and does not meet the component test in paragraph (ii) of the definition of “domestic end product”:

 
(Line Item Number)..........................................(Country of Origin (If known))

 

==Alternate III==

As prescribed in 225.1101(9)(iv), use the following provision, which uses different paragraphs (a), (b)(2), (c)(2)(i), and (c)(2)(ii) than the basic provision: 

 
===BUY AMERICAN—FREE TRADE AGREEMENTS—BALANCE OF PAYMENTS PROGRAM CERTIFICATE—ALTERNATE III (NOV 2014)=== 

 
===(a)  Definitions===

“Canadian end product,” “commercially available off-the-shelf (COTS) item,” “domestic end product,” “foreign end product,” “qualifying country end product,” “South Caucasus/Central and South Asian (SC/CASA) state end product,” and “United States,” as used in this provision have the meanings given in the Buy American—Free Trade Agreements—Balance of Payments Program—Alternate III clause of this solicitation. 

 
===(b)  Evaluation===

The Government—

 
(1)  Will evaluate offers in accordance with the policies and procedures of part 225 of the Defense Federal Acquisition Regulation Supplement; and

 
(2)  For line items subject to the Buy American—Free Trade Agreements—Balance of Payments Program—Alternate III clause of this solicitation, will evaluate offers of qualifying country end products, SC/CASA state end products, or Canadian end products without regard to the restrictions of the Buy American or the Balance of Payments Program. 

 
===(c)  Certifications and identification of country of origin.===

 
(1)  For all line items subject to the Buy American—Free Trade Agreements—Balance of Payments Program—Alternate III clause of this solicitation, the offeror certifies that— 

 
:(i)  Each end product, except the end products listed in paragraph (c)(2) of this provision, is a domestic end product; and

 
:(ii)  Components of unknown origin are considered to have been mined, produced, or manufactured outside the United States or a qualifying country.

 
(2)  The offeror shall identify all end products that are not domestic end products.

 
:(i)  The offeror certifies that the following supplies are qualifying country (except Canadian) or SC/CASA state end products:

 
(Line Item Number).........................................(Country of Origin)

 
:(ii)  The offeror certifies that the following supplies are Free Trade Agreement country end products other than Bahrainian end products, Moroccan end products, Panamanian end products, or Peruvian end products: 

 
(Line Item Number).........................................(Country of Origin)

 
:(iii)  The following supplies are other foreign end products, including end products manufactured in the United States that do not qualify as domestic end products, i.e., an end product that is not a COTS item and does not meet the component test in paragraph (ii) of the definition of “domestic end product”:

 
(Line Item Number)..........................................(Country of Origin (If known))

 

==Alternate IV==

As prescribed in 225.1101(9)(v), use the following provision, which adds “Korean end product” to paragraph (a) and uses “Free Trade Agreement country end products other than Bahrainian end products, Korean end products, Moroccan end products, Panamanian end products, or Peruvian end products” in paragraphs (b)(2) and (c)(2)(ii), rather than “Free Trade Agreement country end products other than Bahrainian end products, Moroccan end products, Panamanian end products, or Peruvian end products” in paragraphs (b)(2) and (c)(2)(ii) of the basic provision: 

 
===BUY AMERICAN—FREE TRADE AGREEMENTS—BALANCE OF PAYMENTS PROGRAM CERTIFICATE—ALTERNATE IV (NOV 2014)=== 

 
===(a)  Definitions===

“Bahrainian end product,” “commercially available off-the-shelf (COTS) item,” “component,” “domestic end product,” “Free Trade Agreement country,” “Free Trade Agreement country end product,” “foreign end product,” “Korean end product,” “Moroccan end product,” “Panamanian end product,” “Peruvian end product,” “qualifying country end product,” and “United States,” as used in this provision, have the meanings given in the Buy American—Free Trade Agreements—Balance of Payments Program—Alternate IV clause of this solicitation. 

 
===(b)  Evaluation===

The Government—

 
(1)  Will evaluate offers in accordance with the policies and procedures of part 225 of the Defense Federal Acquisition Regulation Supplement; and

 
(2)  For line items subject to the Buy American—Free Trade Agreements—Balance of Payments Program—Alternate IV clause of this solicitation, will evaluate offers of qualifying country end products or Free Trade Agreement country end products other than Bahrainian end products, Korean end products, Moroccan end products, Panamanian end products, or Peruvian end products without regard to the restrictions of the Buy American or the Balance of Payments Program. 

 
===(c)  Certifications and identification of country of origin.===

 
(1)  For all line items subject to the Buy American—Free Trade Agreements—Balance of Payments Program—Alternate IV clause of this solicitation, the offeror certifies that— 

 
:(i)  Each end product, except the end products listed in paragraph (c)(2) of this provision, is a domestic end product; and

 
:(ii)  Components of unknown origin are considered to have been mined, produced, or manufactured outside the United States or a qualifying country.

 
(2)  The offeror shall identify all end products that are not domestic end products.

 
:(i)  The offeror certifies that the following supplies are qualifying country (except Australian or Canadian) end products:

 
(Line Item Number).........................................(Country of Origin)

 
:(ii)  The offeror certifies that the following supplies are Free Trade Agreement country end products other than Bahrainian end products, Korean end products, Moroccan end products, Panamanian end products, or Peruvian end products: 

 
(Line Item Number).........................................(Country of Origin)

 
:(iii)  The following supplies are other foreign end products, including end products manufactured in the United States that do not qualify as domestic end products, i.e., an end product that is not a COTS item and does not meet the component test in paragraph (ii) of the definition of “domestic end product”:

 
(Line Item Number)..........................................(Country of Origin (If known))

 

==Alternate V==

As prescribed in 225.1101(9)(vi), use the following provision, which uses different paragraphs (a), (b)(2), (c)(2)(i), and (c)(2)(ii) than the basic provision: 

 
===BUY AMERICAN—FREE TRADE AGREEMENTS—BALANCE OF PAYMENTS PROGRAM CERTIFICATE—ALTERNATE V (NOV 2014)=== 

 
===(a)  Definitions===

“Bahrainian end product,” “commercially available off-the-shelf (COTS) item,” “component,” “domestic end product,” “Free Trade Agreement country,” “Free Trade Agreement country end product,” “foreign end product,” “Korean end product,” “Moroccan end product,” “Panamanian end product,” “Peruvian end product,” “qualifying country end product,” “South Caucasus/Central and South Asian (SC/CASA) state end product,” and “United States,” as used in this provision, have the meanings given in the Buy American Act—Free Trade Agreements—Balance of Payments Program—Alternate V clause of this solicitation. 

 
(b)  Evaluation==

The Government—

 
(1)  Will evaluate offers in accordance with the policies and procedures of part 225 of the Defense Federal Acquisition Regulation Supplement; and

 
(2)  For line items subject to the Buy American—Free Trade Agreements—Balance of Payments Program—Alternate V clause of this solicitation, will evaluate offers of qualifying country end products, SC/CASA state end products, or Free Trade Agreement end products other than Bahrainian end products, Korean end products, Moroccan end products, Panamanian end products, or Peruvian end products without regard to the restrictions of the Buy American statute or the Balance of Payments Program. 

 
===(c)  Certifications and identification of country of origin.===

 
(1)  For all line items subject to the Buy American—Free Trade Agreements—Balance of Payments Program—Alternate V clause of this solicitation, the offeror certifies that— 

 
:(i)  Each end product, except the end products listed in paragraph (c)(2) of this provision, is a domestic end product; and

 
:(ii)  Components of unknown origin are considered to have been mined, produced, or manufactured outside the United States or a qualifying country.

 
(2)  The offeror shall identify all end products that are not domestic end products.

 
:(i)  The offeror certifies that the following supplies are qualifying country (except Australian or Canadian) or SC/CASA state end products:

 
(Line Item Number).........................................(Country of Origin)

 
:(ii)  The offeror certifies that the following supplies are Free Trade Agreement country end products other than Bahrainian end products, Korean end products, Moroccan end products, Panamanian end products, or Peruvian end products: 

 
(Line Item Number).........................................(Country of Origin)

 
:(iii)  The following supplies are other foreign end products, including end products manufactured in the United States that do not qualify as domestic end products, i.e., an end product that is not a COTS item and does not meet the component test in paragraph (ii) of the definition of “domestic end product”:

 
(Line Item Number)..........................................(Country of Origin (If known))
|ImportantNotesRequirements=[[Category:DFARS 252 - Solicitation Provisions and Contract Clauses]]
|IncorporatedbyReference=Yes
|Editor=Marshall
}}